.jpg "brunswick bristol ii pool table parts")
If the felt is glued on - Start at one corner and very gently start pulling the felt off of the slate in a slow, backward motion. Work slowly as you remove it to make sure nothing tears, unless your felt is worn out and you intend on replacing it after your move anyway. The felt surface of a pool table is secured to the slate bed in one of two ways: glue or staples. One of the more time intensive steps of disassembling a pool table is removing the felt, but you’ll have to do it in order to get to the slate bed underneath (which, depending on your pool table’s set up, may need to be taken apart into separate pieces-you won’t know until you take off the felt). Then bag the screws so you will be able to locate them easily later on when you go to reassemble the pool table, and set the side rails aside somewhere safe.
Be careful as you unscrew the last of the bolts so that you can gently remove the side rail or rails from the table. Depending on how your pool table is set up, your side rail may be in one piece or multiple pieces. Take your wrench and remove the bolts that are keeping it in place. Your next step is going to be to remove the side rails. This is when your eye protections is really important, since these staples can easily fall once you dislodge them.Īfter all of the staples are removed and the pockets are off, stick the pockets in a packing box and set aside. Lying on your back, use your flathead screwdriver or a pair of needle nose pliers to carefully remove the staples that are used to hold the drop pockets in place.
Flathead screwdriver or needle nose pliersĪnd don’t forget your eye protection, too!.Here’s what you’ll need in order to disassemble a pool table: It’s actually not that hard to dissemble a pool table if you go into it knowing what to expect. To make sure that you are properly protected, wear eye protection during the disassembly and reassembly process and have a helper on hand to assist with any heavy lifting. Safety is important when taking apart any piece of furniture, and that goes double for something with as many heavy parts as a pool table. Important Safety Tips Before You Disassemble and Reassemble a Pool Table If you’re trying to disassemble and reassemble a pool table of a different variety, you’ll need to find a guide for that specific type. Note: Keep in mind that these directions apply to a standard, wood-framed pool table with drop pockets and a slate bed. So how do you do it? In this post, we’ll cover all of the general advice you need to know in order to disassemble and reassemble a pool table so that you’ll be ready to go on moving day.
#Brunswick bristol ii pool table parts professional#
Standard pool tables are incredibly large and heavy, making it pretty difficult to move them in one piece-even for a professional moving company. Moving with a pool table? There’s a good chance that you’re going to need to take it apart and put it back together.
0 kommentar(er)
